Skip To Content

Enroll in our Steel Foundations course. Login or enroll to get Certified!

What is Galvanized Steel? Steel Foundations

Galvanization is the application of a protective zinc coating that prevents the steel substrate from rusting.

The zinc protects the steel when they are in physical contact because the zinc preferentially oxidizes (rusts) instead of the steel.  This is called galvanic protection, and it is caused by the difference in the two metal’s electrochemical properties.

Galvanized steel strip is extensively used for applications requiring the strength of steel combined with the corrosion resistance of zinc.  Zinc coatings have several different standard chemical compositions from pure zinc to zinc and aluminum. The coating is typically defined by the chemical composition and the coating weight.  Applications of galvanization include roofing and building materials, safety barriers, handrails, consumer appliances, and automotive body parts.

Galvanization can be done using an electroplating process, which uses a high electrical differential between the steel strip and a zinc electrode to dissolve the electrode and deposit the zinc on the steel surface.  However, hot-dip zinc galvanizing is the most used coating process.

Steel strip is hot dip galvanized via a continuous processing line.  A coil of steel is unrolled at the entry of the galvanizing line and the head end of the coil is mechanically attached to the tail end of the previous coil using a welder or stitcher, so the first coil can pull the next coil through the machine.

Connecting the ends of the coils is then combined with accumulator systems, where multiple loops of the coil can be lengthened or shortened to allow time to make the connection at the entry end or cut out the connection at the exit end.  Connecting the ends of the coil and using accumulator systems enables the hot-dip machine to run continuously and feed the annealing furnace and zinc pot without interruptions.

After coming out of the accumulator, the strip is then cleaned and dried prior to being heated in an annealing furnace.  Then, the strip travels into a molten zinc bath where it is coated with liquid zinc or one of many other zinc alloys.  Air knives, after the zinc bath, control the thickness of the coating by blowing high-pressure air onto both sides of the strip surface to remove excess zinc.

For galvanneal coatings, the coated sheet enters an induction furnace section to diffuse the zinc layer into the steel to make preferred iron and zinc alloys that have better bonding and rust preventative properties.  The strip then proceeds through a cooler to cool the zinc coating to “harden” it.

Following a top and bottom inspection area, an oiler or chem-coater section, an exit accumulator, and a shear, the now-galvanized strip is coiled and packaged for the customer.  An oil or chemical/passivation coating is typically required because freshly galvanized material can develop a defect called white rust, if it is exposed to moisture.

Steel Foundations Certificate of Completion Earn your Certificate of Completion by taking the quiz after each module, and scoring 80% or higher.

Course Dashboard

We don't support Internet Explorer

Please use Chrome, Safari, Firefox, or Edge to view this site.